How To Repair Satellite Dish Cable
How to Repair a Satellite Cable
A damaged or severed satellite coaxial cablevision doesn't happen often but requires attention when information technology does. Whether from a tool nick or an aggressive rodent, damaged RG-vi coax can permit in cable-dissentious moisture and remove shield protection from the center conduit. Sensitive satellite signals crave the signal integrity to exist consistent and well-shielded to forestall dropouts and performance anomalies. Splicing a new section of coax onto the damaged slice requires a few tools and new coax. Once completed, the repair will restore satellite viewing and performance to normal standards.
Splicing damaged satellite cable is a necessity to maintain operation.
Step 1
Unscrew the connected end of the damaged coaxial cable from the affected decoder box or distribution hub.
Step 2
Cut off the damaged coax immediately behind the cut or abrasion, using the wire cutters.
Step 3
Insert the freshly cut end of coax into the cablevision stripper 1/2 inch up from the cut. Clasp the handles and rotate the stripper, listening for the stripping sound to cease and resistance to subtract. Pull the stripper direct abroad from the cutting, still gripping the handles.
Stride 4
Fold back the metal braided shield against the outer jacket. Sideslip the coaxial F connector over the braid and jacket until the inner white plastic surrounding the copper conductor butts upward flush against the inner connector neckband.
Step 5
Lay the coax connector'due south neckband into the coax crimper. Squeeze firmly to make the connection. Screw in the male-to-male joiner.
Pace 6
Spiral on the new length of coax leading to the decoder or distribution hub to the other end of the male-to-male joiner. Screw on the other end to the decoder or hub.
Source: https://homesteady.com/how-7161567-repair-satellite-cable.html
Posted by: stinsonowareasti.blogspot.com
0 Response to "How To Repair Satellite Dish Cable"
Post a Comment